McKinsey Quarterly

A new era for manufacturing in China

| Artigo

China’s emergence as a manufacturing powerhouse has been astonishing. In seventh place, trailing Italy, as recently as 1980, China not only overtook the United States in 2011 to become the world’s largest producer of manufactured goods but also used its huge manufacturing engine to boost living standards by doubling the country’s GDP per capita over the last decade. That achievement took the industrializing United Kingdom 150 years.

Today, however, China faces new challenges as economic growth slows, wages and other factor costs rise, value chains become more complex, and consumers grow more sophisticated and demanding. Moreover, these pressures are rising against the backdrop of a more fundamental macroeconomic reality: the almost inevitable decline in the relative role of manufacturing in China as it gets richer.1 Manufacturing growth is slowing more quickly than aggregate economic growth, for example, and evidence suggests that the country is already losing some new factory investments to lower-cost locations, such as Vietnam, sparking concern about China’s manufacturing competitiveness.2

Competitiveness, of course, is a broad term that can confuse more than clarify. During the 1980s, for example, there was much hand-wringing in the United States about declining manufacturing competitiveness versus Japan. In the following decade, however, those concerns faded, replaced by a focus on the failings of “Japan Inc.,” the SUV-fueled resurgence of the US automotive sector, and the boom in US high-tech manufacturing. In the United States then, as in China today, there isn’t just one manufacturing sector; there are many, each with different competitive strengths and weaknesses.

In this article, we move beyond the hyped hopes and frantic fears for Chinese manufacturing as a whole, to gain a more balanced picture of this diverse sector. We start with a summary of four key challenges that affect different types of manufacturers in different ways and then move on to a discussion of competitive priorities whose importance again varies for players of different stripes. Despite the variation across manufacturing subsectors, companies—Chinese owned and multinational alike—can’t escape the need to raise their game and move up the value chain by boosting productivity, refining product-development approaches, and taming supply-chain complexity. Those that do should prosper in the years ahead, while those that rely on yesterday’s model of rock-bottom wages and stratospheric domestic growth rates are likely to fade.

Four challenges

For years, China’s low salaries; strong supply base; high investment in port, road, and rail infrastructure; and solid engineering and technical skills provided a strong platform for manufacturing exports. Meanwhile, a vast domestic market helped fuel China’s continuing transition to a consumption-based economy. Today’s outlook is more mixed. Here, we review four core challenges and the types of players particularly affected by each of them. In doing so, we draw on a set of global manufacturing archetypes established recently by the McKinsey Global Institute (see sidebar “The makeup of Chinese manufacturing”).3

Rising factor costs

Rising wages and the appreciation of the renminbi have dampened China’s exports in recent years and focused global attention on its future viability as a low-cost manufacturing center. Most multinationals that produce labor-intensive goods, like textiles and apparel, are actively seeking to diversify beyond China to reduce costs and mitigate political and supply-chain risks. China-based processors of goods such as beverages, fabricated metals, food, and tobacco are also concerned about rising costs, including those for packaging. Yet their regional focus makes this less a global competitive issue and more a question of which players in the value chain will create the most value.

Rising consumer sophistication

McKinsey research suggests that by 2020, the income of more than half of China’s urban households, calculated on a purchasing- power-parity basis, will catapult them into the upper middle class— a category that barely existed in China in 2000 (for more, see “Mapping China’s middle class”). The members of this group already demand innovative products that require engineering and manufacturing capabilities many local producers do not yet adequately possess. An executive of a Chinese television-panel maker, for example, recently confessed that his company cannot fully meet the requirements of high-end customers and that the quality of his company’s flat-screen panels is exceeded by that of products from fast-moving South Korean competitors. China’s automakers face a similar challenge: consumers perceive their brands as lower in quality, even compared with foreign brands assembled in nearby Chinese factories.

These issues confront players in a range of other sectors—from appliances and chemicals to electrical and office machinery, pharmaceuticals, telecommunications gear, and transportation equipment. What they have in common is that they compete on the strength of their R&D, technology, and ability to bring customers a steady stream of new products and services. Rising consumer expectations will require even food and beverage players to raise their game on freshness and regulatory compliance, areas where China’s standards still lag behind Western ones.

Rising value-chain complexity

Another big challenge is coping with the rising value-chain complexity that accompanies consumer growth. Greater affluence and rapid urbanization require product makers to manage, make, and deliver an array of increasingly diverse and customized products to increasingly remote locations. Between now and 2015, for example, almost two-thirds of the growth in demand for fast-moving consumer goods will come from smaller (Tier-three and Tier-four) cities, which outnumber their Tier-one counterparts, such as Beijing or Shanghai, by a factor of 20.

Product proliferation and booming e-commerce also contribute to value-chain complexity. Business-to-consumer online sales in China are expected to grow by 45 percent a year from 2010 to 2015. For product makers, this means smaller and smaller lot sizes and deliveries to households farther and farther “out there.” During Chinese festival periods, the supply chains of many companies already creak under the strain of online orders. Demanding consumers contribute to supply-chain headaches, as well. Since many retailers in China accept cash-on-delivery payments, it’s not uncommon for shoppers to pit online retailers against one another by ordering, say, three identical products from three retailers—and refusing delivery to all but the first to arrive.

Such issues are relevant for technology companies and others responding to the Chinese consumer’s increasingly sophisticated tastes. But rising value-chain complexity is also a worry for manufacturers of more labor-intensive goods, given the sheer variety of products they make, and for regional processors, whose logistics networks are affected by urbanization and booming infrastructure development.

Heightened volatility

The uncertain global economic environment since 2008 has complicated life for manufacturers everywhere. Those in China have arguably been the most severely affected, given the country’s status as the workshop of the world.

In China’s steel industry, for example, annual demand growth slowed to 3 percent in 2012, after a decade of double-digit increases. The result has been lower capacity utilization, cutthroat competition, and a 56 percent decline in average profit margins for the industry from 2010 to 2012. Similarly, in China’s massive auto industry, annual growth rates over the past five years have varied from 7 percent to 52 percent.4 Appliance and electrical-machinery producers have also experienced strong demand fluctuations, exacerbated by gyrating overseas demand.

Volatility at such levels makes planning difficult for China’s manufacturers. This is problematic for companies that routinely make large, long-lived capital expenditures whose returns are crucial determinants of performance.

Three imperatives for China’s manufacturers

As labor costs rise and slowing growth dampens the ability of China’s steadily rising industrial output to deliver regular productivity gains, manufacturers there will need to strive for global levels of operational excellence. Energy efficiency is a particular opportunity for many companies (see “Seizing China’s energy-efficiency opportunity: A case study”), but far from the only one. Companies hoping to differentiate themselves beyond low-cost labor also can focus their efforts upstream (to harness innovation and product-development efforts) or downstream (to tame supply-chain complexity) or both, depending on the characteristics of competition in their sectors.

1. Achieve manufacturing excellence

Lean and Six Sigma are not new to China. Plant managers in domestic and multinational companies alike have worked hard to bring manufacturing-excellence tools and approaches to the country’s shop floors. But for all these efforts, significant potential remains, mainly because plant managers in China often focus on “hard” technical tools at the expense of “softer” ones involving mind-sets and behavior. A recent lean-manufacturing transformation at one state-owned enterprise, for example, fell far short of its efficiency targets when managers and supervisors failed to complement the otherwise excellent technical changes with the necessary softer skills—including leadership—that would have made the changes stick.

One factor that complicates these problems has been the breakneck development of China’s manufacturing sector, which means that many workers are relatively new to the job. We have seen too many frontline managers, lacking the experience to identify the problems inevitably associated with new plants and new ventures, merely react to problems rather than look for their root causes. Companies facing this problem will never get the full benefit of the productivity improvements they expect from lean. In one auto-assembly and body-shop operation, for example, team leaders spent as little as 5 percent of their time on coaching and problem solving (best practice is about 30 percent). Improvement efforts stalled until the company introduced standardized daily work agendas for team leaders and supervisors, to emphasize that shift meetings were occasions for problem solving and coaching—not firefighting.

Cultural differences also continue to thwart operational improvements in Chinese companies. In one auto plant, the multinational joint-venture partner installed visual-performance boards to make the status of work projects transparent, assuming that the tools would be accepted as they are elsewhere in the global auto industry. In fact, the frontline workers resisted them, interpreting the initiative as a criticism of individual colleagues and forcing the joint venture’s leaders to devise ways to achieve the same effect without alienating the staff. Moreover, the Chinese company’s senior plant managers, while supporting the changes, were initially uncomfortable about role-modeling the more transparent and inclusive way of working. A new continuous-improvement department eventually helped workers and managers alike to view greater transparency and continuous improvement as a new way of working rather than a “flavor of the month” exercise. The automaker’s experience is not uncommon; indeed, the fact that the domestic leaders became involved was encouraging—all too often, the front line must sort out such changes itself.

Finally, companies in China must aspire to extend efficiency improvements throughout the value chain. An automotive joint venture recently began this journey by working with 60 of its suppliers to address the 30 most pressing quality problems. The company fixed them in only six months and has since prevented their recurrence, in large part by equipping its people with assessment tools and skills and by engaging suppliers to address problems at the source. A new performance-management system helps ensure that both the automaker and its suppliers keep up their ends of the bargain.(For more on the relationship between purchasers and suppliers, see sidebar “Seeking purchasing excellence in China.”)

2. Look upstream

For industries reliant on innovation, the triple whammy of rising costs, complexity, and competitive pressure means that the old ways of developing products in China now risk becoming liabilities. Staying competitive will require domestic companies and multinationals alike to change, starting with the mind-sets and attitudes that have pervaded product-development activities in China.

Product-development roadblocks. Domestic Chinese companies must get beyond the “faster, cheaper” fixation that has characterized their approach to R&D in recent decades. For every world-beating Chinese innovator, we still see dozens of smaller players struggling to develop the R&D pipelines that would help them grow from scrappy upstarts into incumbents that can realize their global ambitions. The growth of one China-based medical-device player, for example, has halved in recent years as smaller domestic competitors copy its designs and undercut its prices, much as the company itself copied from multinationals in earlier years. Yet even as it works now to boost its R&D capabilities and to generate market insights—extremely difficult tasks given the absence of necessary skills and institutional processes—the copying mind-set remains strong.

To some extent, multinationals face a mind-set challenge as well. Many invest significantly in their China R&D units5 while continuing to regard them as cost-saving satellites of the home-office “mother ship.” Even when multinationals establish supposedly autonomous R&D units in China, many lack the support and skills to become intellectual-property creators, not just consumers. The experience of another medical-product company we studied—this one a multinational—highlights the challenge.

The leaders of the multinational’s China R&D group thought they’d identified a lucrative niche for a new, low-cost medical-diagnostic product—but were denied funding by the head office back home. The general manager of the China business fought what he thought was a shortsighted decision, winning permission to proceed if his business unit could finance the new product itself. His unit ultimately did just that, in part by promoting the product to customers and collecting advance orders. Once launched, it was highly successful—at first in China but soon in other countries too as the company’s sales reps got wind of its popularity and began offering it in their own regions.

Fast-forward about 18 months, when the company decided to revise the product. Rather than entrust its development to the China R&D team, the company assigned it to the main R&D group at headquarters and used the China team for support. The product flopped when new and technically elegant features and other changes insisted on by the Western group proved too expensive for customers or irrelevant to them.

A success story. The experience of a global lighting manufacturer suggests how some companies are overcoming the challenges. With global consumer preferences shifting toward new applications of a decades-old technology, the company identified a huge market opportunity in LED lighting. The market was also hugely competitive—Chinese and Taiwanese players were piling into the lower-end consumer segments—so a well-designed product clearly wouldn’t be enough. Hitting a low price point and rapidly establishing scale would also be necessary.

The multinational briefly considered using its world-class global R&D unit to develop the product. But senior executives worried that the group’s insular, engineering-centric culture would lead it to “overspec” the offering with costly features. Leaving it to the company’s China unit, on the other hand, was too risky: that group couldn’t generate unique customer insights and didn’t have enough experience working with supplier networks upstream or with the company’s global supply chain downstream to compete on cost and speed. The obvious compromise—combining the groups in a more traditional way by playing to the strengths of each—might mean suffering the usual time-zone delays while reinforcing the “silo” cultures the company’s leaders wanted to break. It ultimately chose to view the project as an experiment for improving both units, so that the one in China would become more independent and the effort’s benefits could be leveraged globally.

To get there, company executives quickly assembled a mixed R&D team in China comprising representatives from the marketing, procurement, supply-chain, and quality groups. For ten weeks, the team worked closely to develop an idea-generation and decision-making process that could not only create a winning, scalable design but also build skills and develop processes the company could use globally. The team collaborated to create and test customer insights, complementing the work with teardowns of competitors’ products. It also conducted shop-floor walkthroughs with suppliers and met with a variety of manufacturing experts to learn how the product could incorporate cheaper, more modular designs.

A set of simple rules proved critical to breaking old habits and unlocking good ideas: to ensure that the team never fixated on one part of the value chain at the expense of another, it consistently asked a handful of total-cost-of-ownership questions when it made its most important decisions. This approach helped spark improvement ideas in unusual areas, such as product packaging: the team found a way to give one of its products a more prominent shelf appearance—a locally important factor because of high levels of competition—while lowering logistics and other costs through the efficient use of materials.

As the effort picked up steam, it became popular with other managers in the China business. The company trained some of these “evangelists” as change agents to maintain momentum at the end of the pilot. This effort ultimately helped the company to lower the costs associated with the product line by an additional 20 percent beyond initial expectations. Further, the effort positions the company well for future cost-reduction opportunities that should arise as the industry matures.

3. Tame supply-chain complexity

While the effects of value-chain complexity vary by manufacturing subsector, most Chinese consumers are changing faster than supply chains are adapting. Indeed, supply chains in the country—both multinational and domestic—are generally set up for a low-labor-cost environment that is quickly disappearing.

Now that long cycles characterized by so-so levels of transparency and cross-functional collaboration are proving insufficient, companies will have to start by revisiting their demand planning. Consider the experience of a large consumer-electronics company whose processes were proving unsuited to the new demand patterns associated with some of its high-end products. Poor or delayed forecasts were disrupting operations and leading to excess inventories, while also upsetting customers downstream.

The turning point was the company’s recognition that its planners were applying the same broad-brush approach to all products, regardless of their market characteristics. In response, the company’s leaders created a tiered approach to detach planning activities for some basic appliances whose demand patterns were well understood (rice cookers, for example) from plans for faster-moving products with less certain demand. For the basic products, the company developed a streamlined, “good enough” planning approach. For the high-end goods, it crafted specific plans by product line.

Its results, including an overall improvement in forecast accuracy to more than 65 percent, from 35 percent, have been impressive. Inventory fell from more than 55 days to 30 days, and the company increased its proportion of on-time deliveries to more than 95 percent, from 60 percent. What’s more, the changes in the company’s planning approach made the work more interesting for its employees, as many of them subsequently received training in advanced forecasting techniques. Consequently, employee turnover among the planning teams went down dramatically—from 50 percent before the effort to just 20 percent afterward. In a second phase, currently under way, the company extended this approach for high-end products to others with similar demand characteristics.

Significantly, the company is separating what had been a monolithic China supply chain into nimbler “splinters” that can better manage complexity. Products with steadier demand go to market in the traditional manner: via coastal distribution centers and large drop-ship orders to retail partners. Higher-end ones travel via smaller regional distribution centers located closer to demand inland. For some products, this approach allows the company to experiment with postponement strategies—finalizing product assembly closer to demand—that help reduce costs and inventory levels (in the case of some customers, by as much as 45 percent).6

As companies look to move their footprints closer to customers in Tier-three and Tier-four cities in China’s interior, another likely change will be the long-term development of logistics hubs and assets. In this way, those companies will be better positioned to serve booming demand for online purchases (see “China’s e-tail revolution”). These investments are risky, and many senior executives we know are worried about overextending their companies. Some describe what they say is a need to “go West—but not too far West.” As for domestic Chinese companies with global plans, they know that getting closer to customers means Western customers as well. A few of the largest white-goods makers are thinking about expanding their assembly and test activities in the developed world, because they recognize that they can no longer adequately serve it from Shenzhen and other hubs.


China’s rise to manufacturing preeminence in recent years has been amazing. Yet rising costs, more sophisticated consumers, and fundamental macroeconomic realities mean that yesterday’s approaches to manufacturing are losing their relevance. For Chinese-owned and multinational manufacturers alike, the imperatives now are to boost productivity, refine product-development approaches, and tame supply-chain complexity. Those that do so can create an enduring competitive edge.

Explore a career with us